Ip Address Configuration - Optimus DC-700ETH/T Manual De Instalación

DC-700ETH/T

3.3.1.1 IP address configuration

ATTENTION: When modifying the IP address it is also necessary to modify the IP address of the unit from the Call
Point or CallPoint Configurator software.
1. Long press and hold on any point in an area free of elements and a circular selection menu will appear.
2. Select Configurations.
3. Enter the administrator password and press OK.
4. Select the GENERAL tab.
5. Click to modify the desired IP addresses.
6. Press CHANGE and then
The device will restart.
7. From the public address server PC, start
the Call Point or CallPoint Configurator
software.
8. In the installation structure, edit the
DC-700ETH/T and modify the IP address.
9. Save and send configurations to devices.
Configuration and User Manual. Version 5.2.001
DC-700ETH/T.
YES to apply the changes.
R+D Department
Configuration and user's manual
3. START-UP
14