Klarstein ICEWIND MAX Manual De Instrucciones página 29

Timer
(1) Automatic switch-off
• While the unit is on, press the TIMER/PRESET button to enter the timer
standby setting. If you press this key several times, you can set the time until
the unit automatically switches to standby mode in the following sequence: 1h
> 2h > 3h > ... > 15h > Cancel timer setting. The corresponding indicator lamp
lights up.
• As soon as the time you have set in the timer has expired, the device
automatically switches to standby mode.
• If you keep the TIMER/PRESET button pressed, the time can be set faster.
(2) Automatic switch-on
If you press the TIMER/PRESET button in standby mode, you can set the time
•
until the unit switches on automatically. If you press this key several times,
you can set the time until the unit automatically switches on in the following
sequence: 1h > 2h > 3h > ... > 15h > Cancel timer setting. The corresponding
indicator lamp lights up.
• As soon as the time you have set in the timer has elapsed, the device will
switch on automatically.
• If you keep the TIMER/PRESET button pressed, the time can be set faster.
Mode
After switching on the unit, press the MODE button. By pressing several times,
the unit switches between the modes: General (normal) - Natural (natural) - Sleep
(snooze mode). The corresponding indicator lamp lights up.
• General: The wind is continuously emitted from the device at the same speed.
• Natural: In this mode, depending on the programme set, the wind occurring
in nature is simulated. The wind speed alternates back and forth between
strong and weak.
• Sleep: The fan speed is automatically reduced to low after some time,
depending on the set programme.
EN
29