Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
28
OPERATION
Switching on
1.
After plugging the power cord into the wall outlet, press the button
switch the device from standby mode to operating mode.
2.
The factory default setting is fan speed 1 in normal mode.
Fan speed
•
The unit has 4 different speed settings.
•
While the unit is on, press the SPEED button to adjust the fan speed. Each time
the SPEED button is pressed, the fan speed is increased by one step. If you
press the button again after the highest speed is reached, the device will start
again at the lowest speed level, etc.
Water tank
Highest water level
Lowest water level
to
Publicidad
Tabla de contenido
