Klarstein ICEWIND MAX Manual De Instrucciones página 34

EN
34
Housing cleaning
1. Wipe the housing with a damp cloth. Do not rinse the housing directly with
water.
2. Do not clean the housing with an aggressive cleaning agent.
3. After cleaning, put all the accessories back into the appliance in reverse order.
Note: To replace the wet curtain, press its bottom into the opening provided
(see figure 3). Then press down the brackets of the holder with your hand. Do
not put the wet curtain back into the unit unless the filter has been installed.
Failure to do so may result in damage to the unit.
Bottom flaps
3
Clamp
Clamp