Installation Into The Cabinet - Fulgor Milano FBC 345 TNF ED Manual De Usuario

Installation into the cabinet

With the help of another individual, or two, move the appliance
into the cabinet. There are two metal plates at the base of
the appliance. Fit the supplied white spacers to these plates.
Ensure that the lips of the cabinet base.
Fig. 8
Insert the appliance into the column placing it on the
opposite site of the hinges, and make sure 3-5mm distance
gap.
After ensuring the match between appliance door and
column door, fix the plastic covers from accessories bag.
1
2
3
Screw the appliance lower part.
4
Fit the seal to the appliance, cut off the excessive part if
necessary. Fit the bottom parts with plastic covers.
5
Use a cross-screwdriver to loosen the connecting pin
underneath the right middle hinge, and adjust to screw
onto the right cabinet wall.
EN
15