Installation Into The Cabinet - Fulgor Milano FBR 300 F ED Manual De Usuario

Installation into the cabinet

With the help of another individual, or two, move the appliance
into the cabinet. There are two metal plates at the base of
the appliance. Fit the supplied white spacers (Fig. 8) to these
plates, as per Fig. 9.
Fig. 8
Insert the appliance into the column placing it on the
opposite site of the hinges, and make sure 3-5mm distance
gap.
After ensuring the match between appliance door and
column door, fix the plastic covers from accessories bag.
1
2
Screw the appliance lower part.
Fit the seal to the appliance, cut off the excessive part if
necessary. Fit the bottom parts with plastic covers.
Ensure that the lips of the spacers are level with the lip of the
cabinet base.
3
4
EN
13