Service Instructions - Stanley 07287 Manual De Instrucciones Y Servicio

O R I G I N A L I N S T R U C T I O N
NOSE ASSEMBLIES
Selection Tables for Monobolt®, Avdelok®, Avtainer®, Maxlok® and Hemlok®

5.4 SERVICE INSTRUCTIONS

Nose assemblies should be serviced at weekly intervals.
• Remove the complete nose assembly using the reverse procedure to the 'Fitting instructions' .
• Any worn or damaged part should be replaced by a new part.
• Particularly check wear on jaws.
• Ensure Jaw Spreader 7 assembly tube (where fi tted) or Front Spring Guide 6 is not distorted.
• Check Spring 9 is not distorted.
• Assemble according to fi tting instructions.
Item numbers in bold refer to the Nose Assembly drawing on page 11.
HEMLOK® 07612-02000
ITEM DESCRIPTION
1 NOSE TIP
2 JAW HOUSING
3 JAWS
4 JAW SPREADER
5 BUFFER
6 LOCKING RING
7 SPRING
8 NOSE CASING
E N G L I S H
PART N QTY
o
07612-02001 1
07612-02003 1
07612-02002 1 SET
07498-04502 1
07498-03003 1
07340-00327 1
07500-00418 1
07340-00306 1
13