Functional Description Of The Equipment - Sagola MACK 150 Manual De Instrucciones

30/31
Insofar as possible, cover the containers of product to be transferred to prevent its contamination.
Do not use the hoses to move the equipment by dragging it. Keep the hoses away from moving
parts and heated surfaces. Do not place them in contact with products that may affect them and
do not expose them to temperatures greater than 65
Insofar as possible, keep the container of the product to be transferred fixed and inserted into it,
the product return tubing (probe) (Nº03 in Figure 3).
The unit has been designed for a long service life and can be used with most of the usual
products on the market. Its use with highly aggressive products will quickly increase the need
for maintenance and spare parts. If you need to apply special products, please contact SAGOLA
S.A.U.
If the equipment is going to remain for a long time running empty, disconnect it from the general
air network.
SAGOLA recommends the installation of some sort of SAGOLA air
treatment equipment in the general compressed air network, in order
to optimise the operation of the equipment.

07. Functional description of the equipment

The Mack 150 or Mack 320/320mix equipment can be used to apply conveniently diluted products
used widely in the Construction, Automotive, Timber, Plastics Industry, etc.
Unit featuring a pneumatic cylinder that activates the hydraulic device which provides the
pressure necessary to spray the product.
The unit can be supplied in the following versions:
- Gravity deposit
- Absorption probe
- The MACK 320 equipment may include versions for single (Airless) or double (Mixed)
regulation.
Suction probe version
The product to be applied is kept in the container supplied by the
manufacturer. From the manufacturer's container, with the unit
in operation, by means of suction and through the probe it flows
to the interior of the unit.
From the unit, through the product hose and the gun, the product
is sprayed.
Product deposit version
The product to be applied is introduced into the unit's gravity
deposit. From the product cup it is fed by gravity to the interior
of the unit.
From the unit, through the product hose and the gun, the product
is sprayed.
o
C or less than –20
ENGLISH
o
C.
Absorption
probe
Product
deposit