Functional Description Of The Equipment; Types Of Regulation - Sagola 6110 Manual De Instrucciones

Do not use the hoses to move the equipment by dragging it. Keep the hoses away from moving
parts and heated surfaces. Do not place them in contact with products that may affect them and
do not expose them to temperatures greater than 65
The unit has been designed for a long service life and can be used with most of the usual pro-
ducts on the market. Its use with highly aggressive products will quickly increase the need for
maintenance and spare parts. If you need to apply special products, please contact with SAGOLA.
If the equipment is going to remain for a long time running empty, disconnect it from the general
air network.
SAGOLA recommends the installation of some sort of SAGOLA air
treatment equipment in the general compressed air network, in order
to optimise the operation of the equipment.

07. Functional description of the equipment

A pressure pot is a stainless steel pressure tank into which the product to be applied is introduced
along with pressurised air. The regulated air transmits the product to the spray gun at a variable
pressure of 0 to 7 bar (0 - 101.5 psi) depending on the model. These pressure pots can be used
with the majority of current coating and finishing products and facilitate the spraying of high vis-
cosity products.
When working with water-based products we must ensure that the inside of the pressure pot is
galvanised.
The equipment requires frequent and thorough cleaning.

07.1. Types of regulation

SINGLE REGULATION
The pressure pot will only have one pressure regulator with
its corresponding pressure gauge. This regulator is in char-
ge of adjusting the internal pressure of the deposit, inside
which the product is located.
Once the pressure of the product has been adjusted, it will
flow to the gun activated by the internal pressure of the pot
when the product outlet valve is opened.
DOUBLE REGULATION
The pressure pot will have two pressure regulators with
their corresponding pressure gauges. The first one, as in
the previous case, is in charge of regulating the internal
pressure of the pot.
The second is responsible for providing the spray gun with
air that can be sprayed. Both regulators are fully indepen-
dent and the desired pressure can be adjusted in each
one.
o
C or less than –20
ENGLISH
o
C.
6110 Co INOX
6110/652/653 INOX