Maintenance; General Maintenance - Skil SS9503-00 Manual Del Propietário

MAINTENANCE

Service
WARNING
maintenance.
WARNING
cause a serious hazard.
Service Center or Authorized SKIL Service Station.

General Maintenance

WARNING
Periodically inspect the entire product for damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product
until all missing or damaged parts are replaced. Please contact customer service or an
authorized service center for assistance.
Cleaning
WARNING
air.
Ventilation openings and switch must be kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objected through openings.
WARNING
ammonia and household detergents that contain ammonia.
To avoid serious personal injury, always turn power switch "OFF"
and remove plug from the power source outlet before performing any
Preventive maintenance performed by unauthorized personnel may
result in misplacing of internal wires and components which could
We recommend that all tool service be performed by a SKIL Factory
When servicing, use only identical replacement parts. Use of any
other parts could create a hazard or cause product damage.
The tool may be cleaned most effectively with compressed dry air.
Always wear safety goggles when cleaning tools with compressed
Certain cleaning agents and solvents damage plastic
these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents,
parts. Some of
31