Assembly And Adjustment - Skil SS9503-00 Manual Del Propietário

ASSEMBLY AND ADJUSTMENT

WARNING
electrical shock during unpacking and
setting up, do not plug the power cord into a
source of power. This cord must remain
unplugged whenever you are assembling or
making adjustments to the scroll saw.
Separate all parts from the packing materials
and check each one against the illustration and
the "List of Loose Parts" to make certain that all
items are accounted for before discarding any
packing material (Fig. 2).
WARNING
the saw, plug in power cord, or turn the
switch on until the missing parts are ob-
tained and are installed correctly.
LIST OF LOOSE PARTS
(In Storage Compartment)
A Blade adaptor with setscrews
B 2.5 mm L Wrench
C 3 mm L Wrench
D Plain-end (pinless) Blade
Assembly instructions
Connect the sawdust blower hose top to the
scroll saw (Fig. 3).
Prior to making adjustments you may want
to mount the scroll saw on a stable surface.
See "Permanent mounting of scroll saw to
workbench" and/or "Temporary mounting of
scroll saw to workbench".
16
To avoid injury from
unexpected starting or
If any parts are missing,
do not attempt to operate
Fig. 2
A
2
1
1
1
Fig. 3
Sawdust Blower Hose
Top (Disconnected)
C
B
D
Sawdust Blower Hose
Top (Connected)