Publicidad
Idiomas disponibles
Idiomas disponibles
en
8
Extension cable.
If the use of an extension
WARNING
cord is required, its length
and conductor cross-section must be ade-
quate for the application in order to prevent
a voltage drop in the extension cord, power
loss and overheating of the power tool. Oth-
erwise, the extension cable and power tool
are prone to electrical danger, and the
working efficiency is decreased.
Intended use of the power tool:
Hand-guided pipe sander for:
– Dry belt grinding of metal pipe surfaces
– Polishing of metal pipe surfaces
in weather-protected environments with
the application tools and accessories recom-
mended by FEIN.
Use only with firm footing.
The power tool is intended for operation by
skilled personnel at non-permanent every-
day use.
This power tool is also suitable for use with
AC generators with sufficient power output
that correspond to the Standard ISO 8528,
design type G2. This Standard is particularly
not complied with when the so-called dis-
tortion factor exceeds 10 %. When in
doubt, please refer to the generator instruc-
tion/specification guide.
All other types of use are considered as not
intended for.
The operator is solely liable for any damage
caused by use not as intended for.
Foreseeable improper use
For safe operation of the power tool and to
exclude misuse, the following is prohibited:
– Unauthorized modifications
– Improper use, particularly (but not exclu-
sively) for the processing of wood, min-
eral materials, magnesium, plastics, fiber-
reinforced composites.
– Non-observance of the operating instruc-
tions
Publicidad
