Tabla de contenido
Publicidad
A setting reminder
message is displayed for three
seconds. Suitable thread tension level is indicated.
Adjust the top thread tension by turning
the
thread tension dial, if necessary. Make sure that the
feed dogs are in the lowered position.
Attach the embroidery
foot P.
(_) Thread tension dial
To drop the feed dogs, push the lever in the
direction of the arrow as illustrated(Z).
To raise the feed dogs, push the lever in the
direction of the arrow as illustrated (_).
Alphabet (block style or script style) can be
selected.
The clothsetter key [[_]
is for using the
clothsetter (optional accessory).
Press the menu key to return to the menu screen.
_) Clothsetter Key : [_
(_) Raised position
(_) Lowered position
CHECK THE SETTINGSj
2_3
e_
®
,--®
• To Attach Embroidery
Foot P
[]
Raise the presser foot lifter, loosen the screw and
remove the foot holder.
Attach Embroidery Foot P and securely tighten
the screw with the screwdriver.
[]
Set the pressure dial at "2".
Note:
After the completion
of sewing, return
the pressure dial back to position
"3".
f
[]
[]
70
Publicidad
Tabla de contenido
