Safety In The Workplace; Personal Safety - MSW -FS-350 Manual De Instrucciones

EN
TECHNICAL DATA
Parameter description Parameter value
Product name FLOOR SAW
MSW- MSW-
Model
FS-350 FS-500
Engine displacement
270
[cm ]
3
Maximum power
9/3600
[hp at rpm]
Dimensions [Width x
547x1518x1055
Depth x Height; mm]
Weight [kg] 74
Saw blade maximum
350
diameter [mm]
Maximum cutting depth
140
[mm]
Water tank capacity [L] 25
Fuel tank capacity [L] 6
Lubrication system
~1,1
capacity [L]
Spark plug type F7RTC (gap 0,7-0,8 mm)
Drive belt type PJ660/260J
Fuel consumption [L/h] Ø 1,4
Acoustic pressure level
89,48
LpA [dB(A)]
Sound power level LWA
112
[dB(A)]
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
14
U S E R M A N U A L
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation. (general
warning sign)
Use ear protection. Exposure to loud noise
may result in hearing loss.
Wear protective goggles.
Wear a dust mask (respiratory tract
protection).
Wear protective gloves.
Wear foot protection.
Wear a face shield.
Use an adjustable guard.
Wear protective clothing.
Emergency stop!
ATTENTION! Hot surface, risk of burns!
Do not smoke near the device. The device
contains flammable substances
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to FLOOR SAW.

2.1. SAFETY IN THE WORKPLACE

a) Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b) Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust. The device generates
sparks which may ignite dust or fumes.
c) If you discover damage or irregular operation,
immediately switch the device off and report it to a
supervisor without delay.
d) If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
Rev. 14.10.2020
e) Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
f) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
g) In case of fire, use a powder or carbon dioxide
(CO2) fire extinguisher (one intended for use on live
electrical devices) to put it out.
h) Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
i) Use the device in a well-ventilated space.
j) The device produces dust and debris during
operation. It is important to protect bystanders from
their harmful effects.
k) Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
l) Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
m) Keep packaging elements and small assembly parts in
a place not available to children.
n) Keep the device away from children and animals.
o) If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
p) Consider the work area environment before starting
to work. Don't expose power tools to rain or wet soil.
Don't use power tools in damp or wet locations. The
work area should be well secured. Don't use the tool
in the presence of flammable liquids or gases. Power
tools produce sparks during normal operation or
when switching ON/OFF. Never use power tools in
dangerous sites containing lacquer, paint, benzene,
thinner, gasoline, gases, adhesive agents, and other
materials which are combustible or explosive.
REMEMBER! When using the device, protect
children and other bystanders.

2.2. PERSONAL SAFETY

a) Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b) The machine may be operated by physically fit
persons who are able to handle the machine, are
properly trained, who have reviewed this operating
manual and have received training in occupational
health and safety.
c) When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d) Use personal protective equipment as required
for working with the device, specified in section 1
(Legend).
The use of correct and approved personal protective
equipment reduces the risk of injury.
e) To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
f) Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
Rev. 14.10.2020
EN
g) Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
h) Use eye, ear and respiratory protection.
i) The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
j) Do not put your hands or other items inside the
device while it is in use!
2.3. SAFE DEVICE USE
a) Do not overload the device. Use the appropriate tools
for the given task. A correctly-selected device will
perform the task for which it was designed better and
in a safer manner.
b) Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c) Make sure the plug is disconnected from the socket
before attempting any adjustments, accessory
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
d) When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose a
hazard in the hands of inexperienced users.
e) Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of the
device. If damage is discovered, hand over the device
for repair before use.
f) Keep the device out of the reach of children.
g) Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
h) To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
i) When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country where
the device will be used.
j) Avoid situations where the device stops working
during use due to excessive loading. This may result in
overheating of the drive elements and damage to the
device.
k) Do not touch articulated parts or accessories unless
the device has been disconnected from the power
source.
l) Do not leave this appliance unattended while it is in
use.
m) Clean the device regularly to prevent stubborn grime
from accumulating.
n) The specified vibrations emission was measured
using standard measurement methods. Vibrations
emissions may change if the device is used in different
surroundings.
o) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
p) Keep the device away from sources of fire and heat.
15