Tronic TLD 2 A1 Instrucciones De Uso página 14

NOTE
► Some mobile phones need to be taken out of their
case for charging.
► At ambient temperatures above 25°C, the charging
power is reduced to protect against overheating. This
increases the charging time of your mobile phone.
► The connection socket (USB type-C)
used as an output.
► Compatible mobile phones are detected automatically.
If the mobile phone is not compatible, the operating
5
LED 1
1
1 /2
adapter.
♦ Charging starts immediately and is indicated on the
display of the mobile phone. If you are using charging
surface 1
charging: operating LED 1
If you are using charging surface 2
4
LED 2
♦ The charging progress is shown on the display of the
mobile phone.
♦ Remove the mobile phone from charging surface
1 3
1
/2
charging is complete.
TLD 2 A1
4
/2 next to the respective charging surface
3
flashes blue. In this case, use a suitable
1
, operating LED 1
lights up.
and unplug the connection cable
2
5
lights up to indicate
5
lights up blue continuously.
3
, then operating
cannot be
6
once
GB │ IE │
11 ■