Water Supply & Drain Line Sizing Connections - Manitowoc CNF201 Manual De Instalación, Operación Y Mantenimiento

Section 2
WATER SUPPLY & DRAIN LINE SIZING CONNECTIONS
Plumbing must conform to state and local codes.
Location Water Temperature
Ice Making Water 45°F (6°C) Min.
Inlet 90°F (32°C) Max.
Ice Machine Drain
ICE MAKING
WATER INLET
TUBING 3/8" MIN.
I.D. (9.5 mm)
Part Number: 000015202 Rev 01 07/22
Caution
Water Pressure
20 psi (137.9 kPa) Min.
80 psi (551.5 kPa) Max.
--- ---
DRAIN
Typical Water Supply Drain Installation
Ice Machine Fitting Tubing Size Up to Ice Machine Fitting
3/8" Female Pipe Thread
1/2" Female Pipe Thread
DRAIN IS PREINSTALLED TO RUN OUT
MOVE DRAIN PLUG TO RUN DRAIN OUT
Installation
3/8" (9.5 mm)
minimum inside diameter
3/4" (19 mm)
minimum inside diameter
DRAIN CONNECTION IS
INTERCHANGEABLE
THE BACK
THE BOTTOM IF DESIRED
11