universalblue UBE2408-21 Manual De Instrucciones página 41

When installing the unit on a built-in oven, the oven should
be placed between two sections of wood. Remember to
leave a space of at least 45x560mm on the back.
When installing the hob on a built-in oven without a forced fan, make
sure there are air inlets and outlets inside the cabinet.
GAS CONNECTION FOR THE GAS HOB
The connection of the hob to the gas supply must be carried out by
a certified installer. During the installation, it is essential to fit an
approved gas tap to isolate the supply of the hob in order to
facilitate any subsequent maintenance. The connection of the unit
41