3.5. CHANGING THE UNITS
A long press on the
in, ft.+in).
Never aim the LASER sight at anyone's eyes.
4.1.SIMPLE DISTANCE MEASUREMENT
During a simple distance measurement, the
1: Press
2: Press
The value measured is displayed immediately.
4.2.CONTINUOUS MEASUREMENT
(MINIMUM / MAXIMUM)
The continuous (tracking) measurement mode is used to go to a specified
distance, for example as indicated by a blueprint. In this mode, the
rangefinder can be moved with respect to the target; the measurement
is displayed in the third row. The minimum and maximum values are
automatically indicated in the first and second rows.
1: Press the
2: Pressing
key changes the unit of measurement (m, ft.
4. MEASUREMENT
once to activate the LASER.
again to trigger the measurement.
key to activate continuous measurement.
or
23
stops the function.
symbol is displayed.