Starting The Ice Machine; Set The Language, Time And Date - Manitowoc 820C Serie Manual De Instalación, Operación Y Mantenimiento

Section 2

Starting the Ice Machine

All Manitowoc ice machines are factory-operated and
adjusted before shipment. Normally, new installations do not
require any adjustment.
Starting the ice machine and completing the Operational
Checks are the responsibilities of the owner/operator.
Adjustments and maintenance procedures outlined in this
manual are not covered by the warranty.
Set the date and time for your area and verify the control
board settings are correct for your location and application.
n
Do not operate equipment that has been misused,
abused, neglected, damaged, or altered/modified from
that of original manufactured specifications.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision concerning use
of the appliance by a person responsible for their safety.
Do not allow children to play with, clean or maintain this
appliance without proper supervision.

Important
Refrigeration compressors must be operated for a
minimum break-in period of 72 hours before full ice
production will be reached.

Set the Language, Time and Date

When the ice machine is installed, the correct time and date
needs to be set for its location.
1. Ensure that the ice machine's power is on.
2. Press the Menu button.
3. Press the Down arrow until Set-Up is highlighted
[bracketed].
4. Press the Checkmark. The Set-Up menu will be displayed
and Language will be highlighted [bracketed]. The
default language is English.
5. Press the Checkmark. You can choose to view the
display in a language other than English by highlighting
your choice and pressing the Checkmark. Selecting one
language will deselect the others.
6. When the check reflects your preference, use the Down
arrow to navigate to Exit and press the Checkmark. The
display will return to the Set-Up menu.
Part Number: 000013325 Rev 02 6/17
Warning
7. Use the Down arrow to highlight Time & Date.
8. Press the Checkmark. The date will appear on the
first line of the display (Mo/Day/Yr) and the time will
appear on the second line (24 Hour). The month will be
underlined.
0 7 2 4 1 0
1 4 : 0 8
E x i t
9. Using the Up or Down arrow, adjust the month, if
necessary.
10. When the correct month appears, use the Right arrow to
move the underline to the day.
11. Using the Up or Down arrow, adjust the day, if necessary.
12. When the correct day appears, use the Right arrow to
move the underline to the year.
13. Using the Up or Down arrow, adjust the year, if
necessary.
14. When the correct year appears, press the Checkmark.
The underline will move down to the hour.
15. Using the Up or Down arrow, adjust the hour, if
necessary.
16. When the correct hour appears, use the Right arrow to
move the underline to minutes.
17. Using the Up or Down arrow, adjust the minutes, if
necessary.
18. When the correct minutes appear, press the Checkmark
twice.
For more details and instructions for changing ice machine
settings, see "Set-Up Menu" in Section 3 Operation.
Installation
>
25