Residual Hazards; Recommissioning After Shutdowns - Bosch Rexroth KU 1 Instrucciones De Montaje

3 842 531 106/2013-04 | TS 1
Location
Belt section
1 Infeed point for conveyor
medium
2 Transverse connector; drive
shaft:
Between component and
workpiece pallet
3 Between workpiece pallet
and workpiece pallet
Curve
4
Turntable:
Infeed point between
turntable and inner/outer
guide
5
Turntable; inner/outer
guide:
Between component and
workpiece pallet
7.2

Residual hazards

Situation
Drawing in of clothing or
long hair
Catching of body parts
Catching of body parts
Drawing in of clothing or
long hair
Catching of body parts
1
2
7.3

Recommissioning after shutdowns

Follow the same procedure used for initial commissioning.
Bosch Rexroth AG
Hazard
Crushing
Tearing hair out
Cutting off
Crushing
Crushing
Tearing hair out
Crushing
3
29/38
Measure
Do not reach into the system
during operation. Wear
suitable protective clothing.
Do not reach into the system
during operation.
Do not reach into the system
during operation.
Do not reach into the system
during operation. Wear
suitable protective clothing.
Do not reach into the system
during operation.
4
5