Assembling The Toothed Belt - Bosch Rexroth KU 1 Instrucciones De Montaje

20/38 Bosch Rexroth AG
1. Connect the drive and return
train; the retainer ring on the
hexagon shaft must be between
the toothed belt wheel and the
outside of the curve.
2. Assemble the toothed belt
return roller (N), see also Fig. 7,

21.
3. Place the toothed drive belt
from the KU 1 on the toothed
belt wheel (E).
6.9

Assembling the toothed belt

E
Fig. 6 Assembling the toothed belt (1/2)
TS 1 | 3 842 531 106/2013-04
1
3
N
2
N
531 106-09