Notes On Safety; About This Chapter; Intended Use; Improper Use - Bosch Rexroth KU 1 Instrucciones De Montaje

3 842 531 106/2013-04 | TS 1
2

Notes on Safety

2.1

About this chapter

The product has been manufactured according to the accepted rules of
current technology. Even so, there is a risk of injury or damage when using
the product if this chapter and the safety and warning information in these
instructions are not observed.

Read these instructions completely and thoroughly before working with
the product.

Keep these instructions in a location where they are accessible to all
users at all times.

Always include the operating instructions when you pass the product
on to third parties.
2.2

Intended use

This product is an incomplete machine (in accordance with the EU
Machinery Directive 2006/42/EC).
The product may be used as follows:
• For installation exclusively in a Rexroth TS 1 transfer system.
• For transporting WT 1 workpiece pallets.
• Maximum load/section load:
— KU 1/90°: 30 kg
— KU 1/180°: 30 kg
— KU 1/360°, with one drive: 24 kg
— KU 1/360°, with two drives: 30 kg
The product is intended for the industrial sector and not designed for
private use.
Intended use includes having read and understood these instructions,
especially the chapter "Notes on Safety".
2.3

Improper use

Any use other than that described in the section "Intended use" is
considered improper and is not permitted. Bosch Rexroth AG is not liable
for any damages resulting from improper use; the user alone bears the risks
of improper use of the product.
Improper use of the product includes:
• Transport of goods other than those specifi ed.
• Persons riding on the product or conveyed material.
• Persons climbing on the product –
walking on the product is not permitted.
• Operation in the non-industrial sector.
• Operation of the product without a safety device to prevent toppling.
Bosch Rexroth AG 7/38