Register The Controller In Rohde App Mykiln ("Access Code"); Faults; Safety Instructions - Rohde ST 630 Operación Manual

Informationen, FAQ and free account at:
app.rohde.eu (Web)
10.4.2.

Register the controller in ROHDE app myKiln ("Access code")

To register the controller in ROHDE app myKiln, the controller's "access code" is required. This "access code" is
located on the back of the controller. Each controller with an integrated module for wireless data transmission has its
own unique "access code".

11. Faults

11.1. Safety instructions

DANGER
Disconnect the control unit and kiln from the power supply before troubleshooting and
repair work.
⇒ Risk of severe personal injury, property damage and even death.
NOTE
In the event of faults that you cannot rectify yourself, contact a qualified electrician, the
local specialist or the manufacturer.
NOTE
In the event of faults which have to do with the kiln itself to which the control system is
connected, the instruction manual for the kiln must be followed.
myKiln in the App Store (Android)
83 / 317 - EN -
myKiln in the App Store (Apple)