Example Of A Firing Program; Program Examples (Ceramics); Information On Firing Programs; Cleaning The Control Unit - Rohde ST 630 Operación Manual

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 140

13. Example of a firing program

13.1. Program examples (ceramics)

Initial firing
1
1050°C
Biscuit firing
2
950°C
Earthenware
3
1050°C
High-
temperature
4
stoneware
1250°C

13.2. Information on firing programs

• The preset controller programs are simple sample programs for biscuit, earthenware and stoneware firing.
• These programs must be checked before firing to allow the firing temperature, heating rates and soak times to
be adapted to the materials used.
• The variety of ceramic bodies, engobes, glazes and decorative colours as well as different types, sizes and
performances of the kilns used, and individual furniture set assemblies, types and quantities of products to be
fired make it difficult to make generally applicable recommendations.
• We advise against using uncontrolled full power heating ramps ("FULL") to protect heating elements and the kiln
from unnecessary wear and to allow for repeatable firing results.
• The preset program no. 1 "Initial firing" is used for:
­
the initial firing of the kiln after commissioning
­
after replacing new heating elements (oxidation firing)
­
the initial firing of new furniture material (stilts and batts)
• When using program no. 1 "Initial firing", the inlet and outlet air openings of the kiln must be open. Please also
consult the kiln instruction manual.

14. Cleaning the control unit

General safety note:
CAUTION
The control unit and the kiln must not be hosed down with water jets, hoses or
high-pressure cleaners for cleaning.
100°C/h
1050°C
60°C/h
600°C
150°C/h
900°C
150°C/h
900°C
The possible consequences are:
­ Damage to components,
­ Impairment of functions
­ Failure of control system and kiln
Always clean the control unit and kiln dry.
Do not use water or compressed air for cleaning.
88 / 317 - EN -
00 h:00 min
FULL/SKIP
00 h:00 min
100
00 h:00 min
100
00 h:00 min
60
01 h:30
1050°C
min
00 h:00
950°C
min
00 h:30
1050°C
min
00 h:05
1250°C
min
END
END
END
END

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

St 632

Tabla de contenido