Power On/Off - Miracle-Ear CHARGE fullpower RIC/BTE Manual Del Usuario

Operation
Charging Your Miracle-EarCHARGE
fullpower RIC/BTE & custom AV
• While charging the onboard battery
with the power cord,
the 4 LEDs will be:
– Glowing while charging
– Solid when charged
• When charging the hearing aids without the power cord
attached, the LEDs turn off after 10 seconds.
• To illuminate LEDs, remove a hearing aid from its charging
port/post for three seconds and then replace it. LEDs
illuminate for 10 seconds before turning off again.
– 4 Solid > 75%
– 3 Solid < 75%
– 2 Solid < 50%
– 1 Solid < 25%
– 1 Blinking = Charge Low
8
™
Power On & Off
ON - The hearing aids will power on automatically after removing
them from the charger. There is a delay that allows you time
to insert your hearing aid into your ear.
ON - If the hearing aid is manually powered off, pressing the user
control for three seconds will power it on. The delay exists to
give you time to insert the hearing aid into your ear.
OFF - The hearing aids will power off automatically when placed in
the charging port/post and charging begins.
OFF - The hearing aids can be powered off manually by pressing
the user control for three seconds.
Operation
9