Approved Kombitools; Mounting The Loop Handle - Stihl KM 94 R Manual De Instrucciones

exhaust system is equipped with a
complying spark arrester that is
maintained in effective working order.
The owner/operator of this product is
responsible for properly maintaining the
spark arrester. Other states or
governmental entities/agencies, such as
the U.S. Forest Service, may have
similar requirements. Contact your local
fire agency or forest service for the laws
or regulations relating to fire protection
requirements.
Do not clean your machine with a
pressure washer. The solid jet of water
may damage parts of the machine.
Store the power tool in a dry and high or
locked location out of reach of children.
Before storing for longer than a few
days, always empty the fuel tank. See
chapter "Storing the Machine" in this
manual.
KM 94 R

Approved KombiTools

The following STIHL KombiTools may
be attached to the KombiEngine:
KombiTool Intended use:
FS-KM Trimmer with mow-
ing head
1)
FS-KM Trimmer with grass
cutting blade
FSB-KM Trimmer with mow-
ing head
HL-KM 145° Hedge trimmer,
adjustable
HL-KM 0° Hedge trimmer
FH-KM 145° Scrub cutter
BG-KM Blower
HT-KM Pole pruner
BF-KM Soil cultivator
FBD-KM Cutting bed edges
FCB-KM Cutting lawn edges
FCS-KM Cutting lawn edges
KB-KM Bristle brush
KW-KM Sweeper drum
assembly
1)
The included bracket (barrier bar)
on the loop handle must be used -
see also "Fit loop handle"

Mounting the Loop Handle

A barrier bar is supplied with the
machine. Fit the barrier bar on the loop
handle.
2
1
Fit the square nuts (1) in the barrier
N
bar (2); the holes must line up.
English
1
9