Night Light - Nonny BM-03 Instrucciones De Uso

EN | Baby breathing monitor
Warning when the monitor is not turned on
If a parent or other caregiver places a baby in the cot but forgets to turn on the
monitor, the orange light with the button symbol (symbol no. 5 in Fig. 3) will flash
and a short quiet beep will sound after 30 seconds. The light flashes whilst
the device evaluates the excitation on the pad, but the device is not turned on.
To switch on the device, the user must press the mechanical button, the
device will not automatically switch from standby to active mode.
Turning the Switch Guard function off and on
The baby location detection function is switched on by default. If you want to turn this
feature off or on again, press the mechanical button before inserting the batteries,
then insert the batteries and keep the button pressed. After 10 secs, deactivation
or reactivation is confirmed by a beep and the indicator light with the button symbol
flashing.
If the Switch Guard function is deactivated, a warning beep will sound twice at the end
of the automatic test.
Removal detection
If a parent or other caregiver removes a baby from the cot and forgets to switch
off the device, the orange light with the button symbol will flash after 10 seconds and
a quiet beep will sound. If the device is not switched off, a pre-alarm will sound after
17 secs from the last detection and then the alarm.
2.2.2

NIGHT LIGHT

For your convenience, the breathing monitor is equipped
with a light, which is mainly used to check on the baby
at night.
Activation and deactivation of the light function
The lamp function is deactivated by default. To activate it,
simultaneously press the mechanical button and the
lamp's capacitive switch, which is located in the middle
of the NANNY logo (Fig. 5a), for 10 secs. After activation,
the lamp flashes three times.
The light function can be deactivated in the same way.
The activation and deactivation of the light function can
be done only in the standby mode. The light function
is completely deactivated if the batteries are low, except
if there is an alarm in night mode.
8
MXA51105
Fig. 5a - Activating/deactivating
the light function