REPLACING THE LIGHT
1.
Disconnect the oven from the power supply .
2.
Unscrew the cover from the light, replace the bulb
and screw the cover back on the light .
3.
Reconnect the oven to the power supply .
Please note: Only use 25-40 W/230 V type E-14, T300 °C
incandescent bulbs, or 20-40 W/230 V type G9, T300 °C
halogen bulbs.
The bulb used in the product is specifically designed for
domestic appliances and is not suitable for general room
lighting within the home (EC Regulation 244/2009).
Light bulbs are available from our After-sales Service.
- If using halogen bulbs, do not handle them with your bare
hands as your fingerprints could cause damage. Do not use
the oven until the light cover has been refitted.
EN
49