Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5
Operation
5.1 Startup
These operating instructions must be brought to the attention of all persons entrusted with the operation of the
machine, with particular emphasis on the chapter "Safety instructions".
5.2 Switching on
Use the following procedure to switch on the
machine:
1.
Push the rocker switch 3 forwards and hold it.
The saw motor is turned on and the feed
➢
starts 1 second later. The saw motor
accelerates to its operating speed.
The machine is switched on
✓
Push the rocker switch 3 backwards to return the saw unit to its starting position. The return
travel is automatically switched off when the home position is reached.
The saw blade may still rotate during return travel.
5.3 Rotational speed setting
Use the following procedure to select the
rotational speed:
1.
Select the desired level at the setting wheel (9).
At the setting wheel (9), you can adjust the
➢
saw blade speed continuously between
2600 and 5200 rpm.
The rotational speed is set.
✓
The table below shows the saw blade speed settings that are suitable for your application:
20
Fig. 9: Switching the machine on
Fig. 10: Selecting the rotational speed at the setting wheel
PSS 3100 SE
01/2022
Publicidad
Tabla de contenido
