Specifications; Hydraulic Oil - Stanley PNT1000L-PC Manual De Instrucciones

E N G L I S H
Specifi cations
Table 2: Tool Specifi cations
Feature
Weight
Overall length
Overall height
Tool Stroke
Pulling Force
Air Supply

Hydraulic Oil

Setting capacity
Tool Noise Level*
(EN ISO 15744)
Tool Vibration Level
(EN28662-1)
* SEF recommends the use of hearing protection when operating this tool
Hydraulic oil
Use only Stanley Engineered Fastening specifi ed hydraulic lubrication oils as shown in Table 3.
Use of any other oil could reduce the tool performance or even damage the tool.
Table 3: Specifi ed Hydraulic Oils
Company name
Idemitsu Kosan
ExxonMobil
Cosmo Oil
JXTG Energy
Showa Shell
Idemitsu Kosan
8
Specifi cation
2.77 kg (6.11 lbs)
315 mm (12.4 in)
295 mm (11.6 in)
1.3 – 10.5 mm (0.05 – 0.413 in)
24.3 kN @ 5.0 bar ( 5463 lbf @ 72.5 psi)
0.5 – 0.6Mpa (5 – 6 bar) (72.5 – 87 psi)
See Table 3, Specifi ed Hydraulic Oils
See Table 1, POP NUT™ blind rivet nut range
Lpa(Sound pressure) : 87.9dB, Kpa(Uncertainty) : ≤1.5dB
Lwa(Sound power) : 98.9dB, Kwa(Uncertainty) : ≤1.5dB
Lpc(C-weighted peak) : 87.2dB, Kpc(Uncertainty) : ≤1.5dB
2
Ahd : 0.347 m/s
K(Uncertainty) : 0.529 m/s 2
Figure 1: Tool Dimensions (mm)
Product name
SUPERHYDRO-A-68
Mobil DTE 68
Cosmo oil pass 68
FBK RO68
Shell Tellus Oil 68
SUPERHYDRO-A-68