Mafell K55cc Instrucciones De Funcionamiento Y Seguridad página 17

K55cc/KSS50cc
6. To move the movable guard to the maximum
open position, either use the pre-feed lever
(11) or do it manually.
To remove the saw blade, manually hold
➢
the guard in the open position.
7. Turn the disconnected machine onto the motor
unit. The saw blade points upward.
8. Insert the Allen key (B) into the flange screw
(12) and turn it counterclockwise until the
saw shaft locks into place.
➢ The saw blade is retained in position and
the flange screw can be released.
9. Using the Allen key (B), turn the flange screw
(12) counterclockwise to loosen it.
10. Remove the flange screw (12) and the front
clamping flange (13).
11. Remove the old saw blade.
Clamping flanges must be free of
➢
adhering parts!
The new saw blade can now be installed.
➢
01/2022
Fig. 8: Opening the guard
Fig. 9: Removing the old saw blade
17