Operation; Startup; Switching On; Light - Mafell K55cc Instrucciones De Funcionamiento Y Seguridad

5

Operation

5.1 Startup

These operating instructions must be brought to the attention of all persons entrusted with the operation of the
machine, with particular emphasis on the chapter "Safety instructions".

5.2 Switching on

Use the following procedure to switch on the
machine:
1. Press the switch-on lock (4) forward to unlock.
2. With the switch-on lock depressed, actuate
and hold the operating lever (6).
3. Release the switch-on lock (4).
The machine is switched on
✓
Since the switch is not latching, the machine runs only as long as the operating lever is
pressed.

5.3 Light

To illuminate a large section of the work area, the
machine is equipped with a light module.
The light module is switched on when the machine
is switched on.
The light module is switched off automatically when
the machine is stopped for some time.
20
Fig. 13: Switching the machine on
Fig. 14: Light module on machine
K55cc/KSS50cc
01/2022