Mafell K55cc Instrucciones De Funcionamiento Y Seguridad página 18

12. Position the new saw blade (14) on the rear
flange (16).
Ensure that the direction of rotation is
➢
correct when you install the saw blade.
The saw teeth or the arrow on the saw
blade (14) must point in the direction of
the arrow (15) on the machine.
13. Fit clamping flange (13) and flange screw (12).
14. Using the Allen key (B), turn the flange screw
(12) clockwise to tighten it.
➢ The saw blade is secured.
15. Close the movable guard.
16. To do this, press the locking lever (3) down.
The mechanism that locks the saw shaft
➢
is activated.
➢ The operating lever is unlocked.
The saw blade is changed.
✓
18
Fig. 10: Replacing the saw blade
Fig. 11: Unlocking the operating lever
K55cc/KSS50cc
01/2022