Working; Extracting Dry Materials - Festool CTC SYS I Manual De Instrucciones

English
3a
3b
3c
11.5 Use/Adjust shoulder strap [4]
Max. permissible load of shoulder strap: 44.09
lbs. (20 kg)
The shoulder strap can be attached in two dif­
ferent positions:
– Carrying the cordless mobile dust extrac­
tor: Shoulder strap on the cordless mobile
dust extractor [4a]
– Carrying the storage box with the cordless
mobile dust extractor: Shoulder strap on
the storage box [4b]
Before lifting, check the shoulder strap for
proper functionality and put the T-loc on the
cordless mobile dust extractor into the corre­
sponding position.
Adjust the length of the shoulder strap at the
adjusting tab [4c].
4a
click
4b
2
14
click
1
4c

12 Working

12.1 Extracting dry materials

CAUTION
Hazardous dust
Damage to the respiratory passage
► Always use a filter bag!
CAUTION
Hazardous dust
Damage to the respiratory passage
► Check that the main filter is undamaged
before extracting.
When extracting dust that exceeds the
limit value, only extract from one dust
source (power or compressed-air tool).
Observe the following when extracting dust
generated by operating power tools:
Ensure there is adequate ventilation! Observe
regional regulations!
Limit values: Exhaust air max. 50% of the fresh
air volume
Equation: room volume V
Observe the following information:
– Keep the area around the exhaust air open­
ing [1-8] clear.
– The cordless mobile dust extractor is a sta­
tionary system and not suitable for pulling
at the suction hose. Use the handle [1-5],
front handle [1-7] or shoulder strap [4].
Two cleaning nozzles [5] are stored inside
the storage box.
5
x air renewal rate L
R W