Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
c) Setting the timer to turn one or more cooking zone off
Touching the heating zone selection control that you want to
set the timer for. (e.g. zone 3#)
In short time,
touch timer control, the minder indicator will
start flashing and "10" will show in the timer display.
Set the time by touching the or control of the timer
Hint: Touch the "-" or "+" control of the timer
once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer
will decrease or increase by 10 minutes.
Touching the "-" and "+" together, the timer is cancelled, and
the "00" will show in the minute display.
When the time is set, it will begin to count down
immediately. The display will show the remaining time and
the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator will
illuminate indicating that zone is selected.
When cooking timer expires, the corresponding cooking zone
will be switched off automatically.
Other cooking zone will keep operating if they are turned on previously.
The pictures shown above are for reference only, and the final product shall prevail.
3.3.6 Default working times
Auto shut down is a safety protection function for your induction hob. It shut down automatically if
ever you forget to turn off your cooking. The default working times for various power levels are shown
in the below table:
Power level
Default working timer (hour)
When the pot is removed, the induction hob can stop heating immediately and the hob automatically
switch off after 2 minutes.
Set one zone
1
2
3
4
8
8
8
4
12
5
6
7
8
4
4
2
2
9
2
Publicidad
Tabla de contenido
