Infiniton IND-4TBM Manual De Instrucciones página 53

• If the appliance is being connected directly to the mains an omnipolar circuit-breaker must be
installed with a minimum opening of 3mm between contacts.
The installer must ensure that the correct electrical connection has been made and that it is
•
compliant with safety regulations.
The cable must not be bent or compressed.
•
The cable must be checked regularly and replaced by authorised technicians only.
•
•
The bottom surface and the power cord of the hob are not accessible after installation.
Correct disposal of this
product
The symbol on the product, or in its packaging, indicates that this product may not
be treated as household wasted, Instead, it should be taken to the appropriate
waste collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by the inappropriate waste handling of this product. For more
detailed information about the recycling of this product, please contact your local
council, your household waste disposal service, or the shop where you purchased
the product.
23