Nilfisk Liberty SC50 Instrucciones De Uso página 10

Ocultar thumbs Ver también para Liberty SC50:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 194
A - ENGLISH
UV BULB REPLACEMENT - CONTINUED
Bulb Installation
CAUTION!
New bulbs have a protective coating around them. DO NOT remove this protective wrap from the bulb.
1. Place a new bulb into the bulb housing. Ensure correct alignment with the socket then carefully press the bulb into the socket.
2. Reinstall the bulb clamps (2) on both ends of the bulb.
3. Identify which bulb was replaced by using the Bulb Identi cation Number (C). With the machine ON and the bulb housing still
removed from the machine press and hold for 10 seconds the Bulb Life Rest Button (A) which corresponds to the bulb number
that was replaced to reset the hour countdown. Power Off the machine.
4. Reinstall the Bulb Housing onto the UVGI Mount Assembly (see Bulb Housing Assembly Removal and Installation).
A - 10
INSTRUCTIONS FOR USE
Nil sk Liberty SC50 UVGI - 56091255
2
7/2021

Publicidad

Tabla de contenido
loading

Tabla de contenido