INSTALLATION AND CIRCUIT - DRAINING
IV-4-2-Use
IV-4-2-1-Bilge pump
The bilge pump is not wired to the battery switch and operates independently; the switch
is always connected.
Automatic operation (fixed position); in this position the bilge pump works automatically.
The pilot light is on. The indicator will not run down your battery, even when at anchor for
several months.
Stop; in this position (set position), the bilge pump is off. The pilot light is off.
Forced operation; the switch has to be held depressed to operate it. As soon as you release
the switch, it returns to automatic (1).
1 - On position
automatic
WARNING
2 - Position
stop
AT ANCHOR, SET THE BILGE PUMP SWITCH TO THE
AUTOMATIC STARTING POSITION.
36 / 43
3 - Forced
starting position
forced