or similarly qualified persons in order to avoid a
hazard.
• The appliance should not be placed immediately
below a socket.
WARNINGS: In order to avoid overheating,
•
do not cover the heater.
• Do not use this heater with a programmer, timer,
separate remote-control system or any other
device that turns on the heater automatically
because there is a risk of fire if the device is
covered or placed incorrectly.
• CAUTION: To avoid hazard due to inadvertent
resetting of the thermal cutout, this appliance
must not be powered via an external switch,
such as a timer, or connected to a circuit that is
regularly switched on and off by the electricity
supplier.
• This heater must not be disposed of with
household waste; it must be taken to a local
center of recovery and recycling of electrical
appliances.
The heater must be installed so that switches
•
and other control devices cannot be
a person in the bath or shower.
• If being fitted in a bathroom, a 30mA RCD must
be used.
• With respect to the details of how to install the
appliance
"INSTALLATION".
onto
the
24
wall,
refer
touched by
to
part