Infiniton HAR-120 Manual De Instrucciones página 5

• Ensure that the base plate is firmly in position and then gently screw the
butterfly nuts into position and secure firmly.
Instructions for Use
• Insert plug into socket.
• Set the power supply switch (orange colour) to the "ON" position. This
will enable the upper and middle heating tube to start. To control the
other tubes use switches 2 and 3.
• To allow the heater to oscillate please press the 'TURN' button.
• • This device has a safety device that disconnects the device when the
radiator is tilted by means of a switch located on the lower part of the
radiator
Maintenance
• Always remove the plug from the socket outlet and allow the heater to
cool down before cleaning it.
• Wipe the heater with a soft damp (not wet) cloth.
WARNING :
Do not immerse the heater in water.
Do not use any cleaning chemicals such as detergents and abrasives.
Do not allow the interior to get wet as this could create a hazard.
• In case of malfunction or doubt, do not try to repair the heater yourself, it
may result in a fire hazard or electric shock.
Specification
Rated voltage
Power consumption
: 220-240V ~ 50HZ
: 1200 watts