Technical Details - Sagola 6110 Manual De Instrucciones

24/25

04. Technical details

The inside pressure the tank allows spraying the paint with a pressure between 0 and 7 bar (0-
101.5 psi).
Dimensions
(cm.)
Dimensions
(inchs)
Net Weight
(Kg.)
Net Weight
(pounds)
Tank capacity
Tank capacity
Max. operating air
pressure
Max. air inlet pressure
Operating supply
pressure
Relief pressure with
safety valve
Air inlet joint
Product outlet joint
Operating
temperature
Directives and regulations
Machine Directive
PED Directive
ATEX Regulation
(*) Non electric equipment in explosion hazard areas (ATEX) must have the earthing connections and/or sta-
tic-free feed hoses.
Equipment identification
The Pressure pot is provided with the manufacturer's identification plate, shown in the picture
below. For no reason must the plate be removed, even if the equipment must be re-sold. For any
communication with the Sagola always refer to the serial number written on the plate itself.
Pressure Pots Technical Details
6110 INOX 6110 Co INOX
20.8 x 68.3 cm 20.8 x 68.3 cm
8.2 x 26.9" 8.2 x 26.9"
11.2 Kg 10 Kg
24.7 lbs 22 lbs
10 Liters 10 Liters
2.5 US Galon 2.5 US Galon
4 bar 7 bar
58 psi 101.5 psi
4 bar 7 bar
58 psi 101.5 psi
0 - 4 bar 0 - 7 bar
0 - 58 psi 0 - 101.5 psi
4 bar 7 bar
58 psi 101.5 psi
BSP 1/4"
BSP 3/8"
o
0 - 60 C
o
0 - 122 F
2006/42/EU
2014/68/EU
Community directive complied with 2014/34/EU
Explosive atmosphere (Atex):
ENGLISH
652 INOX
36.5 x 74.4 cm 36.5 x 102.8 cm
14.4 x 29.3" 14.4 x 40.5"
38 Kg
83.7 lbs
25 Liters
7 US Galon 13 US Galon
4 bar (58 psi)
4 bar (58 psi)
0 - 4 bar (0 - 58 psi)
4 bar (58 psi)
BSP 1/4"
BSP 3/8" (barb. Ø 8 mm.)
o
0 - 60 C
o
0 - 122
II 2G T4 x (*)
653 INOX
45 Kg
99 lbs
50 Liters
F