Safety Information; General Rules - Dometic ENERGY & LIGHTING TEC Serie Instrucciones De Montaje Y De Uso

GENERAL RULES

- When designing and building this unit, the
manufacturer has paid particular attention
to all aspects that might result in a risk to
the health and safety of those working with
the unit itself. As well as complying with
current legal requirements, all "rules of
good manufacturing practice" have been
followed. The aim of this information is to
notify users of the need to pay particular
attention, in order to prevent any type of
risk.The need for prudence can never be
sufficiently stressed. Safety also depends
on the operators working with the unit.
- Please read the instructions provided
in this manual carefully, and also read
the instructions affixed directly to the
unit, in particular those relating to safety.
Dedicating a short time to reading this
information will help avoid unnecessary
accidents; it is always too late to remember
what you should have done when you
have already done it.
- Pay particular attention to the meaning of
the symbols on the unit; their shape and
colour are significant for the purposes of
safety. Make sure they remain legible, and
follow the instructions given.
- Do not tamper with, elude, eliminate or
RULES FOR MOVEMENT AND INSTALLATION
- Lift and move the unit as described by
the manufacturer and indicated on the
packaging, on the unit itself and in the user
manual.
- The staff loading, unloading and moving
the unit, must have experience and abilities
gaiend and recognised in the sector in
question, and must be familiar with the
lifting equipment to be used.
- Loading and transport must be carried
out using means of adequate capacity,
anchoring the unit at the points foreseen
by the manufacturer. Those authorised
to carry out these operations must have
specific experience and abilities, so as
All manuals and user guides at all-guides.com

SAFETY INFORMATION

- Staff carrying out any type of operation on
- When working, only use the clothing and/
- During normal use or for whatever
- Every
- All phases of installation must be
- -
11
bypass the safety devices fitted. Failure to
comply with this requirement may result in
severe risks for the health and safety of
persons.
the unit throughout its working life must
have specific technical qualifications,
abilities and experience that has been
acquired in and is recognised by the
specific sector. If these requirements are
lacking, damage to the health and safety
of persons may result.
or personal protection devices indicated
in the instructions for use supplied by the
manufacturer, or those foreseen by local
laws on safety in the workplace.
operation, always ensure there is sufficient
access space to use the comands in
conditions that are not liable to result in a
risk for the health and safety of persons.
operation,
indicated, must be carried out with
the motor turned off and after allowing
sufficient time for it to cool down, so as to
avoid the risk of scalding.
to safeguard themselves and any other
persons involved.
considered, from the time the general
plan was drawn up. Before starting these
phases, as well as defining the installation
area, the person authorised to carry out
these operations must, if necessary,
implement a "safety plan" to safeguard
the persons directly involved from harm,
and must scrupulously follow all laws, with
particular reference to those regarding
mobile work sites.
unless expressly
User Manual
GB