INFORMATION ON MOVEMENT AND INSTALLATION
RECOMMENDATIONS FOR MOVEMENT AND INSTALLATION
When moving and installing the appliance,
follow
the
indications
the manufacturer and marked on the
packaging and in the instructions for
PACKING AND UNPACKING
The packaging, to reduce
working dimensions, may
vary according to the type
of transport being used.
To
facilitate
transport,
the appliance may be
shipped with some of its
components dismantled
and suitably protected
and wrapped.
Certain parts, particularly
electrical components, are protected with
damp-proof nylon.
All the information required to carry out
loading and unloading is indicated on the
packaging.
During
unloading,
components are undamaged and that all
LOADING AND TRANSPORT
Loading and transport, according to
the place of destination, may take
place using different means.
The following diagram illustrates the
most common solutions.
During transport, in order to avoid
sudden movements, make sure the
load is adequately fastened to the
vehicle.
All manuals and user guides at all-guides.com
provided
by
check
that
the
-
-
15
use. Those authorised to carry out these
operations must, if necessary, organise
a "safety plan" to safeguard the persons
directly involved.
A
the components are present.
The packing materials must be disposed of
in compliance with current laws.
The packaging may be:
A) on a pallet in a cardboard box
B) in a crate (for overland or air cargo
shipping)
means of transport
equipment
B
lifting
User Manual
GB