Maintenance Information - Dometic ENERGY & LIGHTING TEC Serie Instrucciones De Montaje Y De Uso

RECOMMENDATIONS FOR MAINTENANCE
Before carrying out any type of maintenance
operation, activate all the safety devices
provided and evaluate whether or not
those working on the unit and those in the
vicinity of the unit should be informed. In
TABLE OF MAINTENANCE OPERATIONS
Important
Keep the appliance in a state of
maximum efficiency, by carrying out
the planned maintenance operations
foreseen by the manufacturer. If these
are properly carried out, they will
Action
check the fuel and top up
clean the fuel filter
change the fuel filter
check that there are no leaks
check the state of the injector
check the fuel injector phases
check the fuel injection pump
check the lubricant level in the oil sump
change the lubricant oil
clean the oil filter
check that there are no oil leaks
adjust play in the inlet and outlet valves
check that delivery connector is tight
check pump rotor
clean and deoxidise metal parts
change the zinc anode
change the piston rings
X* = must be carried out by an authorised dealer or by qualified personnel.
All manuals and user guides at all-guides.com

MAINTENANCE INFORMATION

Daily
X
X
after use
X
before use
the first time
the first time
X
after use
- -
27
particular, make sure that the surrounding
area is clearly signed and prevent access
to all the devices that might, if activated,
result in unexpected dangers or endanger
the health and safety of persons.
ensure the appliance provides optimum
performance, a longer working life and
constant compliance with the safety
requirements.
1 month every 3
st
FIRST 50 months or
hours 200 hours
X
X X
2 time and
nd
following
X*
X
every 6 yearly or
months or 1000 hours
400 hours
X
X*
X*
X*
X*
2 time and
nd
following
X*
X
X
X
X*
User Manual
GB