Publicidad
support@nextlevelracing.com
)
)
A
B
A) Align the threaded inserts on the Centre Outer Pole with the slots on the Support Bracket. Bolt through with 2 x Knobs.
26
B) Fit the Centre Inner Pole into the Centre Outer Pole. Align the threaded inserts on the Centre Inner Pole with the slot in the
Centre Outer Pole. Bolt through and secure with 2 x Knobs previously uninstalled in Step 24.
OPTIONAL KEYBOARD PLATE SIDE MOUNT
27
Align the mounting slots on the Keyboard Arm with the holes on the Mouse Plate. Bolt through and
secure with 2 x M6 Bolts, Washers and Flange Nuts.
28
Align the mounting holes on the Keyboard Plate with the through holes on the Keyboard Arm.
Bolt through and secure with 2 x M8 Bolts, Washers and Flange Nuts.
PARTS:
• • 1 x Centre Inner Pole
• • 4 x 12mm Knobs
PARTS:
• • 1 x Keyboard Arm
• • 2 x M6 16mm Bolts
• • 2 x M6 Washers
• • 2 x M6 Flange Nuts
PARTS:
• • 1 x Keyboard Plate
• • 2 x M8 55mm Bolts
• • 2 x M8 Washers
• • 2 x M8 Flange Nuts
18
OPTIONAL STRAIGHT SIDE ARM
)
)
B
A
29
A) Uninstall 2 x M8 Bolts, Washers and Flange Nuts securing the Side Arm. Detach the Flight Plate from the Side Arm.
B) Uninstall 2 x M8 Bolts, Washers and Flange Nuts securing one side of the Cross Member to the Seat Frame.
)
)
A
B
30
A) Align the Straight Side Arm with the through holes in the Seat Frame and Cross Member.
B) Bolt through and secure with 2 x M8 Bolts, Washers and Flange Nuts uninstalled in Step 29.
31
Align the Mouse Plate Threaded Studs with the mounting holes on the Straight Side Arm.
Secure with 4 x M8 Flange Nuts.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
PARTS:
NOTE: The Straight Side Arm is
interchangeable and works on both
• • 1 x Straight Side Arm
sides of the cockpit.
• • 2 x M8 55mm Bolts
• • 2 x M8 Washers
• • 2 x M8 Flange Nuts
PARTS:
• • 4 x M8 Flange Nuts
1 x Mouse Plate
19
Publicidad
