Next Level Racing FLIGHT SIMULATOR BOEING COMMERCIAL EDITION Manual De Instrucciones página 5

support@nextlevelracing.com
)
)
B
A
01 A) Align the mounting holes on the Pedal Angle Plate with the slots on the Pedal Frame.
B) Bolt through and secure with 4 x M8 Bolts, Square Washers and Flange Nuts.
)
)
B
A
02
A) Align the mounting slots on the Pedal Plate with the threaded inserts on the Pedal Angle Plate.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
)
B
)
A
)
C
A) Align the mounting holes on the Seat Frames with the mounting holes and threaded inserts on the Pedal Frame.
03
B) On the top of the frame, bolt through and secure the Seat Frames with 2 x M8 16mm Bolts and Washers.
C) Bolt through the centre of the frame and secure with 2 x M8 55mm Bolts, Washers and Flange Nuts.
PARTS:
• • 1 x Pedal Frame
• • 1 x Pedal Angle Plate
• • 4 x M8 55mm Bolts
• • 4 x Square Washers
• • 4 x M8 Flange Nuts
PARTS:
• • 1 x Pedal Plate
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
PARTS:
• • 2 x Seat Frames
• • 2 x M8 55mm Bolts
• • 2 x M8 16mm Bolts
• • 4 x M8 Washers
• • 2 x M8 Flange Nuts
8
)
)
B
A
04 Align the threaded inserts on the End Plate with the mounting holes on the Left and Right Seat
Frames. Bolt through and secure with 4 x M8 Bolts and Washers.
05
Align the mounting holes on the Side Panels with the through holes on the Seat Frames. Bolt through
and secure with 4 x M8 Bolts, Washers and Flange Nuts.
)
)
B
A
06
A) Align the mounting holes on the Cross Member with the through holes on the Left and Right Seat Frames and Side Panels.
B) Bolt through and secure with 4 x M8 Bolts, Washers and Flange Nuts.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1 x End Plate
• • 4 x M8 55mm Bolts
• • 4 x M8 Washers
PARTS:
• • 2 x Side Panels
• • 4 x M8 55mm Bolts
• • 4 x M8 Washers
• • 4 x M8 Flange Nuts
PARTS:
• • 1 x Cross Member
• • 4 x M8 55mm Bolts
• • 4 x M8 Washers
• • 4 x M8 Flange Nuts
9