STERWINS A061003 Manual De Instrucciones página 262

1. SAFETY INSTRUCTIONS
Replace faulty silencer.
Make sure that the working area is clear of stones,sticks,wire or
other objects that could damage the product or its engine.
Do not till very wet soil because it tends to stick to the working
tool preventing the proper rotation, and it could also cause you to
slip and fall.
Always maintain a firm grip on the product. For better guidance
apply light pressure to handles.
Do not try to till too deeply or force the product into soil that is
extremely hard or resistant.
Walk the product through the soil at a normal pace and in as
straight a line as possible.
Till in slight overlapping rows. The most effective pattern for
tilling soils is moving the produce up and down in verticals lines,
then move the product in horizontal lines from left to right. This
will keep the rows even and ensures that all the ground is tilled
without missing any spots.
Pay special attention when changing direction.Apply light pressure
onto the handle so that the tines are lifted to make a turn. Turn the
product around guided by the wheels. Gradually release pressure
and move the tines back to the ground.
Work only in daylight or in good artificial light.
Always be sure of your footing on slopes.
Walking, never run with the machine.
Work across the slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not work on excessively steep slopes.
Use extreme caution when reversing or pulling the product
towards you.
Do not change the engine governor settings or overspeed the
259
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN