STERWINS A061003 Manual De Instrucciones página 265

FR
1. SAFETY INSTRUCTIONS
ES
PT
To reduce the impact of noise and vibration emission, limit the
time of operation, use low-vibration and low-noise operating
IT
modes as well as wear personal protective equipment.
Take the following points into account to minimise the vibration
EL
and noise exposure risks:
PL
Only use the product as intended by its design and these
instructions.
RU
Ensure that the product is in good condition and well maintained.
Use correct cutting device for the product and ensure they in good
KZ
condition.
Keep tight grip on the handles/gripping surface.
UA
Maintain this product in accordance with these instructions and
RO
keep it well lubricated (where appropriate).
Plan your work schedule to spread any high vibration tool use
EN
across a longer period of time.
Even if you are operating this product in accordance with all the
safety requirements, potential risks of injury and damage remain.
The following dangers can arise in connection with the structure
and design of this product:
Health defects resulting from vibration emission if the product is
being used over long periods of time or not adequately managed
and properly maintained.
Injuries and damage to property due to broken application tools or
the sudden impact of hidden objects during use.
Danger of injury and property damage caused by flying objects.
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out,this appliance must not be
supplied through an external switching device, such as a timer, or
262