Before Putting The Equipment Into Operation - STERWINS A061003 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32

5. BEFORE PUTTING THE EQUIPMENT INTO OPERATION

CAUTION: Place the box side down on a flat surface.Carefully remove the electric tiller from the
box by holding its transport handle.
DANGER! Risk of injury due to electric shock.
Warning! Do not plug in before installation is fully completed!
PREPARING THE EXTENSION CORD
As a basic principle, we recommend the use
- A proper extension cord, in order to avoid unnecessary damage to the tiller. (Fig. A)
CAUTION:You should only use extension cords for outdoor use,PVC or rubber cord ordinary
duty with a cross sectional area not less than 1.5 mm
Before and during use, check the supply and extension cords for damage. Do not use the
appliance if the cord is damaged or worn. Keep extension cord away from cutting elements. If
the cord is damaged during use,disconnect the cord from the supply immediately. Do not touch
the cord before disconnecting the supply.
(Fig. A)
2
.
267
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN

Publicidad

Tabla de contenido
loading

Productos relacionados para STERWINS A061003

Tabla de contenido