Operation; Wheel Adjustment - STERWINS A061003 Manual De Instrucciones

FR

6. OPERATION

ES
DANGER! Risk of injury due to electric shock.
PT Warning! Do not plug in before installation is fully completed!
IT
Setting up your tiller
EL
Set up the tiller on flat and firm ground to ensure safe and sturdy operating.
PL
Insert the lower handle
.
5
Fix the upper
RU
Fasten the power cord
KZ
UA
Risk of death by electrocution or electric shock or serious personal
injury if power lines or electric cords are contacted. Never operate
RO
tiller over electrical sources, cords, or wires.
EN

Wheel adjustment

The wheels can be adjusted to
Pull on the wheel
in position.
When shipped,the wheels on the tiller are set to a transport position.
The other two are working position.The higher the wheel, the deeper the field.
Connect to power supply when you are ready to use the tiller.
Installing/Removing extension cord
Insert the female end of the extension cord into the product.
Connect the male end of the extension cord to the power source.
Make sure the extension cord is secured before beginning operation.
into the handle fixing hole of the tiller and tighten it with the knob
15
and lower handles
7 15
to the handle with two cord clips
4
positions.
3
and move to required position, let go of the wheel and make sure it locks
14
with the knob .
5
.
6
268